Non Skid Additive for Epoxy Floors

epoxy floors

When it comes to choosing an additive for your epoxy floor, you’ll want to use one that’s non-skid. Fortunately, there are many different kinds of additives on the market, and here are a few things to look for in one. Non-skid additives for epoxy floors can help your floor stay stable when wet. The types of additives available include SSR-20, Ground polymer grit, and Armor Grip.

Armor Grip

An Armor Grip non skid additive for an epoxy floor provides a high-tech alternative to standard non-skid aggregates. The micronized, lightweight industrial strength particles in Armor Grip make the surface less slippery and can be used with both water and solvent-based coatings. These materials are non-skid and durable, and will also protect your floor from water and detergents while adding a subtle texture to the finish. They are safe for use with solvent-based and water-based floor coatings, but not with silicone or water repellents.

When selecting an Armor Grip non skid additive, remember to check the product’s compatibility with the surface finish. It is important to note that Surface Grip is not intended to be added to the first coat of a single-component coating. Instead, it should be applied to a subsequent coat of high-performance flooring. Before selecting a product, always test it on a test area to check the adhesion, texture, and performance of the coating. If you find that a non-skid additive affects the film’s appearance, consider a different coating material.

Everlast Flooring

Everlast Flooring is a premium brand of non-skid additives for epoxy floors. This product line contains a proprietary additive that prevents pathogens from colonizing the floors. This additive is extremely important in health care environments. It is registered with the EPA as an antimicrobial, killing germs, fungi, yeasts, bacteria, and actinomycetes. The coating can be installed over a variety of floor coverings, including plywood. Afterwards, it’s ready for foot traffic within 24 hours.

Non-skid additives are also useful in high-traffic indoor concrete areas. High-gloss epoxy floors can become slick when wet, and it is important to have slip resistance. One such additive is the Original Color Chips Easy Sprinkle Can. This non-skid additive adds texture to the base coat by spreading grit into the mix. An average of 1.5 pounds of non-skid additive can be spread out on a 500 square foot area. To apply non-skid more aggressively, back-roll the area.


SSR-20-non skid additive for epoxy floor coating is a versatile anti-slip additive for indoor and outdoor concrete surfaces. This additive is ideal for high-traffic indoor or outdoor areas where slip-and-fall accidents are a major concern. Non-skid floor coatings are also beneficial for exterior concrete, where wet or icy conditions can make the surface slippery. If you’re considering using an anti-skid coating on your floors, be sure to research your options for installation.

SSR-20 comes in two grit sizes, 20 and 50. The latter is less aggressive and easier to apply to floors. Its non-skid profile is not visible, which makes it suitable for light-duty commercial applications. The grit size of SSR-20 varies depending on the application. A 20-grit bead requires more SSR-20 than a 50-grit one.

Ground polymer grit

Ground polymer grit is often recommended for use with epoxy floors, garage floor paint, and other coatings. It is made of small, micronized beads of polymer that become translucent when wet. It has the added benefit of providing small bumps for better grip. The ground polymer grit also works well with water-based and thin floor coatings. This article discusses several of the advantages of using this additive.

Epoxy floors are incredibly durable. They are resistant to chemical exposure and shock, so even heavy items and vehicles falling to the floor won’t causing damage to the coating. Likewise, chemicals from housework and car maintenance won’t eat away at the epoxy coating. They are easily cleaned without leaving a trace of harmful residue. This makes them an excellent choice for garage floors, especially for those with a large car collection.

SSR-20 anti-slip aggregate

SSR-20 is a polypropylene microaggregate that provides a non-slip surface for floor coatings. Its anti-skid properties are provided by the particles’ angular profile, and the poly bead is applied without sanding the surface before the coating is applied. The SSR-20 anti-slip aggregate is packaged in 1-pound and 1.9-pound containers.

The SSR-20 anti-slip aggregate for the surface of epoxy floors should be applied in a layer of at least 20 mils, using a notched trowel. This layer of epoxy should have a wet edge of one to two feet. Next, grade 28-quartz aggregate should be broadcast into the epoxy layer and allowed to cure. After the epoxy layer has completely cured, the aggregate should be lightly hand stoned.

Duraamen’s anti-slip additive

The best way to prevent slip falls is to use an anti-slip additive on your epoxy floor. This type of product helps to prevent slipping incidents, such as when spills occur. Its anti-slip additive is a vital part of floor coating systems because slippery surfaces tend to be smooth. The additive also adds additional traction to the floor, making it safer for those who are working on it.

The anti-skid additive in Duraamen U45/46/U90/P72 provides excellent abrasion resistance and non-slip surface characteristics. This additive is available in coarse, medium, and fine particles. Superfine particles are available in 240 meshes. When mixing the product, be sure to test it first before applying it to the floor. If you think it will affect the finish, try mixing it in a sample first.